High Efficiency Commercial Gas Boiler For Sale
A commercial gas boiler is a piece of equipment that provides hot water and heating to your home or business. They are a more advanced version of domestic boilers and can be used in a variety of locations, including restaurants, hotels and office buildings. The main difference between domestic and commercial boilers is that they generate higher temperatures which mean they’re more efficient at heating larger spaces. If you’re thinking about replacing your old boiler then read on for our guide to everything you need to know about buying new ones!
What is a commercial gas boiler?
Commercial boiler systems
A commercial gas boiler is a large heating appliance that heats water to produce hot water. The hot water can be used for heating or for producing steam, which is then used to drive turbines for generating electricity. Commercial boilers are more efficient than electric boilers because they have higher heat outputs and lower operating costs. Their greater efficiency means you can use less fuel to produce the same amount of power as an electric boiler would need.
Commercial boilers are used in offices, shops, hotels and schools as well as industrial facilities such as factories and warehouses. A commercial gas boiler can also be used to heat schools or even small factories. They are less expensive to run than oil or coal boilers because they produce fewer carbon emissions and lower maintenance costs.
Get an online fixed price in 20 seconds:
How do commercial gas boilers work?
Commercial gas boiler service near me
Commercial gas boilers work by burning natural gas or propane to produce hot water. This hot water is piped throughout the building and used for heating, hot water, and sometimes even cooking.
The commercial gas boiler heats the water using a heat exchanger that transfers energy from the flue gases from combustion into the water in your system. The temperature of these flue gases will be well over 1,000 degrees celsius when entering your commercial boiler’s burner compartment. A large amount of heat energy is required to raise these temperatures up to 250 degrees celsius so as not to damage any other components within your system such as plastic pipes etc., due to excessive heat being transferred through them directly into them after passing through this heat exchanger section inside your commercial boiler itself.
What is the difference between a domestic and commercial gas boiler?
Domestic vs commercial gas boiler
Commercial gas boilers are larger and more powerful than domestic gas boilers. A typical domestic boiler will be around 30-40kW, whereas commercial ones can be up to 200kW. This is largely due to the difference in usage between the two types of boilers. Domestic boilers are used for single houses or small premises, whereas commercial gas boilers are often found in large buildings with multiple rooms and several people using hot water at any one time. As such, they are capable of providing hot water at a much higher rate than their smaller counterparts.
Additionally, commercial gas boilers tend to be more complex than domestic ones because they need to meet higher standards required by businesses that use them on a daily basis (such as restaurants). These higher standards include efficiency ratings for various aspects such as energy efficiency rating (EER), condensing technology etc., which mean that commercial boilers tend to be more efficient than their home equivalents when it comes down it cost per unit time spent heating water.
What are the main components of a commercial gas boiler?
Commercial gas boiler parts
There are a few main components to a commercial gas boiler, including:
- Gas burner. This is the part of the unit that actually converts natural gas into hot water.
- Heat exchanger. It helps improve efficiency by mixing cool incoming water with hot outgoing water in order to create more efficient heat transfer.
- Controls. These include thermostats and sensors that regulate temperature, pressure, and flow rate through your system (for example).
- Water tank(s). This is where liquid water is stored within your boiler—usually as part of an evaporator coil or similar mechanism—and heated until it becomes vaporized steam.* Air venting system
Are commercial gas boilers efficient?
High efficiency commercial gas boiler
Commercial gas boilers are efficient in a number of ways. First, they only use a small amount of fuel per unit of energy produced. This means that even though the initial cost of installing a commercial gas boiler can be high, it pays for itself over time due to its low operating costs and reduced carbon dioxide emissions.
In fact, most commercial gas boilers have an efficiency rating of over 90%. A typical commercial gas boiler might have a SEER of up to 12 and an HSPF rating of up to 8. This means it can remove 1,200 watts of heat from a room per hour, while using 875 watts to do so, for a total efficiency rating of 1.28 (12/875 = 1.28). Making them some of the most efficient heating systems on the market today.
They are more efficient than domestic gas boilers, as they use less energy to produce the same amount of heat. They’re also more efficient than oil boilers, which use liquid fuel (like kerosene) and burn it to produce heat. Electric boilers have the least efficiency rating because they don’t burn any fuel at all, but instead generate heat from an electrical current passing through a metal coil inside the boiler.
Get FREE Boiler Quotes
- ✔Get FREE Local Boiler Quotes today
- ✔Compare The Best Prices
- ✔Save Money On Your New Boiler Today!
How much does a commercial gas boiler cost?
Commercial gas boiler prices
The cost of a commercial gas boiler depends on your business’s size, model, and brand. The average cost of a commercial gas boiler is around $3,000 – $10,000. We have some basic guidelines below so you can get an idea of what you should expect to pay:
- Size: bigger is better! If you can afford it (and have room), we recommend that you go with the biggest unit that will fit in your space. This will save money on heating costs and give you more flexibility when it comes time for repairs or maintenance work because your installer won’t have to cut down walls or move pipes around as much.
- Model: reputable brands tend to charge more than off-brands but they also offer better service and parts availability—and if something goes wrong with your installation down the road then having access to these resources could end up saving money overall due to fewer repair bills over time (not just those initial ones).
The average cost for installing a new commercial water heater is between $1 per square foot as well as 3% or less of total project costs (whichever is greater). This means that if your home has 1,500 square feet worth of space then expect to pay somewhere between $1,500-$5000 depending on what kind of system they use within their budget range!
It’s clear that commercial gas boilers are a great option for businesses that need reliable heating. They give you control over your heating costs, they’re easy to maintain and they can save you money in the long term. If you want more information about commercial gas boilers, don’t hesitate to get in touch with us today: +0086 186-2391-5479!